This unit is designed to operate in vehicles with 12 volt (negative ground) electrical systems.
The unit is a microprocessor driven Power Distribution Center with 4 inputs for switching devices and 4 out put loads.
When using the up-fitters system that comes with the vehicle, the system is usually limited to 10 or 20 amp outputs. Some Beacons or work lights may require more amperage than the up-fitters system can provide. Installing the PDC-4 will provide the extra amperage required to operate these heavier loads.
This can be used for body lighting as well, working off the truck harness as a current amplifier.
For the up-fitter that has a limited amount of current available from the factory unit, this unit allows the confidence needed to assure the big loads will work every time.
Features:
- 4 Inputs Positive Inputs
- 4 Outputs 12 Volt, 20 amp Outputs
- 12 Volt Operation
- Auto-Reset Circuit Breakers
- Emergency Override Capabilities
- Battery Saving Load Shedding
- Easy Installation
- Works with any low amperage mechanical switch